ROWENTA Ultrasteam Steambrush

Ultrasteam Steambrush
Perfect for touch ups

Hand held steamer great for quick touch-ups or light duty needs. The manual pump provides precise steam output and control. The wide steam head has maximum steam distribution, and variable steam control provide quick results. Removable fabric brush and lint pad. The hanging hook allows for convenient storage, and the travel pouch is great for on-the-go.

Reference : DR6055Q1

EASY, ERGONOMIC AND PORTABLE HANDHELD CLOTHES STEAMER SOLUTION

The Rowenta DR6055 Ultrasteam Brush is a high performance handheld garment steamer brush that is ergonomic and easy to use.

It is great for quick touch-ups or light duty needs and also on delicate garment.

The powerful 800 watts brush has a unique electronic pump provides on-demand steam with only one touch on the trigger.

The steamer brush is ready in 50 seconds.

It has a transparent, removable water tank that holds 50mL of water.

The wide steam head has maximum steam distribution.

It comes with on board attachment and accessories such as removable fabric brush, lint pad and a travel pouch.

Measurements are 11-1/2-Inch by 6-Inch by 4-Inch; 1-year limited warranty.

This is the perfect complement of a Rowenta steam iron.

Electronic Pump: Steam on demand at the touch of a button.

Features a wide steam head for quick steaming results

Removable Water Tank: transparent tank is removable for filling at the tap, holds 1.7 oz.

Accessories Included: removable fabric brush, lint brush and storage bag included.

Electrical pump for more pressurized steam

Very large steam head with 5 steam holes for quick and efficient de-wrinkling

Removable water tank easy to fill - Autonomy : up to 4 shirts

On/off heat indicator light for added safety

Dual Voltage – perfect for traveling

Accessories : fabric brush, lint pad attachment to remove lint from garment and travel pouch.

Wattage 800W

Technical specifications / comparison

Power 800  W
1600  W
Heat-up time 50  s
40  s
Water tank capacity 55  ml
200  ml
Autonomy 4  min
10  min
Steam ready indicator    
   

Documentation

FAQ

Your product is not plugged in or is not switched on ==> Check that your product is properly connected to a power socket and that the switch is on "I".
The water level in the tank is too low ==> Unplug the appliance and fill the tank.
The pump is unprimed ==>Press and hold the steam button for a few seconds to prime the pump.
The removable tank is not installed correctly ==> Check the correct positioning of the tank on the product.
The product is in "Stand-by" mode ==> Press the "On-Off" button and wait until it stops flashing.
Your product is not plugged in or is not switched on ==> Check that your product is properly connected to a power socket and that the switch is on "I".
The product is in "Stand-by" mode ==> Press the "On-Off" button and wait until it stops flashing.
The water tank is not installed correctly or its locking valve is not closed properly ==> Check that the valve is closed and that the tank is installed correctly on the product.
Your appliance has limescale, consult the "Descaling" section in the instructions.
The "Steam" button is in Continuous Steam position. Unlock it by pressing it once.
You have used descaling chemicals or additives in the water.
Never add such products to the water tank. These contain organic waste or minerals that condense under the influence of heat and cause spitting, brown dripping or premature aging of your appliance.
You have used descaling chemicals or additives in the water.
Never add such products to the water tank. These contain organic waste or minerals that condense under the influence of heat and cause spitting, brown dripping or premature aging of your appliance.
After following the instructions in the user manual for starting the appliance, make sure that your electrical socket is working by plugging another appliance. If it still does not work, do not try to dismantle or repair the appliance yourself, instead, take it to an approved repair centre
Do not use your appliance. To avoid any danger, have it replaced by an approved repair centre.
Your appliance contains valuable materials which can be recovered or recycled. Leave it at a local civic waste collection point.
If you believe that one part is missing, please call Consumer Services Center and we will help you find a suitable solution.
Please go to the “Accessories” section of the website to easily find whatever you need for your product.
Find more detailed information in the Warranty section of the website.