ROWENTA Ultrasteam Steambrush
Ultrasteam SteambrushPerfect for touch ups
Hand held steamer great for quick touch-ups or light duty needs. The manual pump provides precise steam output and control. The wide steam head has maximum steam distribution, and variable steam control provide quick results. Removable fabric brush and lint pad. The hanging hook allows for convenient storage, and the travel pouch is great for on-the-go.
Reference : DR6055Q1
Voir la description du produit
EASY, ERGONOMIC AND PORTABLE HANDHELD CLOTHES STEAMER SOLUTION
The Rowenta DR6055 Ultrasteam Brush is a high performance handheld garment steamer brush that is ergonomic and easy to use.
It is great for quick touch-ups or light duty needs and also on delicate garment.
The powerful 800 watts brush has a unique electronic pump provides on-demand steam with only one touch on the trigger.
The steamer brush is ready in 50 seconds.
It has a transparent, removable water tank that holds 50mL of water.
The wide steam head has maximum steam distribution.
It comes with on board attachment and accessories such as removable fabric brush, lint pad and a travel pouch.
Measurements are 11-1/2-Inch by 6-Inch by 4-Inch; 1-year limited warranty.
This is the perfect complement of a Rowenta steam iron.
Electronic Pump: Steam on demand at the touch of a button.
Features a wide steam head for quick steaming results
Removable Water Tank: transparent tank is removable for filling at the tap, holds 1.7 oz.
Accessories Included: removable fabric brush, lint brush and storage bag included.
Electrical pump for more pressurized steam
Very large steam head with 5 steam holes for quick and efficient de-wrinkling
Removable water tank easy to fill - Autonomy : up to 4 shirts
On/off heat indicator light for added safety
Dual Voltage – perfect for traveling
Accessories : fabric brush, lint pad attachment to remove lint from garment and travel pouch.
Wattage 800W
Voir la description du produit
Technical specifications / comparison
| Power | 800
W |
1600
W |
| Heat-up time | 50
s |
40
s |
| Water tank capacity | 55
ml |
200
ml |
| Autonomy | 4
min |
10
min |
| Steam ready indicator |
|
|
| Bi-Volt |
|
N/A |
Voir les produits
See the offer of Accessories Store
Voir les documents liés
Voir les questions les plus fréquentes
FAQ
• Untreated tap water:
Your appliance has been designed to use untreated tap water.
If your water is very hard, mix 50% untreated tap water and 50% distilled water.
• Types of water not to use:
Heat concentrates the elements contained in water during evaporation. The types of water listed below may contain organic waste, mineral or chemical elements that can cause spitting, brown staining or premature wear of the appliance:
- water from clothes dryers
- scented or softened water
- water from refrigerators, batteries, air conditioners
- rain water
- boiled, filtered or bottled water
In order to ensure the best performance from your iron, these types of water should not be used for ironing.
Your appliance has been designed to use untreated tap water.
If your water is very hard, mix 50% untreated tap water and 50% distilled water.
• Types of water not to use:
Heat concentrates the elements contained in water during evaporation. The types of water listed below may contain organic waste, mineral or chemical elements that can cause spitting, brown staining or premature wear of the appliance:
- water from clothes dryers
- scented or softened water
- water from refrigerators, batteries, air conditioners
- rain water
- boiled, filtered or bottled water
In order to ensure the best performance from your iron, these types of water should not be used for ironing.
Your product is not plugged in or is not switched on ==> Check that your product is properly connected to a power socket and that the switch is on "I".
The water level in the tank is too low ==> Unplug the appliance and fill the tank.
The pump is unprimed ==>Press and hold the steam button for a few seconds to prime the pump.
The removable tank is not installed correctly ==> Check the correct positioning of the tank on the product.
The product is in "Stand-by" mode ==> Press the "On-Off" button and wait until it stops flashing.
The water level in the tank is too low ==> Unplug the appliance and fill the tank.
The pump is unprimed ==>Press and hold the steam button for a few seconds to prime the pump.
The removable tank is not installed correctly ==> Check the correct positioning of the tank on the product.
The product is in "Stand-by" mode ==> Press the "On-Off" button and wait until it stops flashing.
Your product is not plugged in or is not switched on ==> Check that your product is properly connected to a power socket and that the switch is on "I".
The product is in "Stand-by" mode ==> Press the "On-Off" button and wait until it stops flashing.
The product is in "Stand-by" mode ==> Press the "On-Off" button and wait until it stops flashing.
The water tank is not installed correctly or its locking valve is not closed properly ==> Check that the valve is closed and that the tank is installed correctly on the product.
Your appliance has limescale, consult the "Descaling" section in the instructions.
The "Steam" button is in Continuous Steam position. Unlock it by pressing it once.
You have used descaling chemicals or additives in the water.
Never add such products to the water tank. These contain organic waste or minerals that condense under the influence of heat and cause spitting, brown dripping or premature aging of your appliance.
Never add such products to the water tank. These contain organic waste or minerals that condense under the influence of heat and cause spitting, brown dripping or premature aging of your appliance.
You have used descaling chemicals or additives in the water.
Never add such products to the water tank. These contain organic waste or minerals that condense under the influence of heat and cause spitting, brown dripping or premature aging of your appliance.
Never add such products to the water tank. These contain organic waste or minerals that condense under the influence of heat and cause spitting, brown dripping or premature aging of your appliance.
After following the instructions in the user manual for starting the appliance, make sure that your electrical socket is working by plugging another appliance. If it still does not work, do not try to dismantle or repair the appliance yourself, instead, take it to an approved repair centre
Do not use your appliance. To avoid any danger, have it replaced by an approved repair centre.
Your appliance contains valuable materials which can be recovered or recycled. Leave it at a local civic waste collection point.
If you believe that one part is missing, please call Consumer Services Center and we will help you find a suitable solution.
Please go to the “Accessories” section of the website to easily find whatever you need for your product.
Find more detailed information in the Warranty section of the website.
Voir les produits
