ROWENTA X-CEL STEAM+

X-CEL STEAM+
Easier and faster wrinkle removal*

Rowenta X'cel Steam + offers fast, efficient steam just in time! The steamer's powerful design - with two steam levels, a cast aluminum heated plate with ceramic coating and ultra-fast heating - ensures high-performance, effective steaming every day. Thanks to its new technology, steam anything, anywhere, at any moment with a single vertical movement - even when it's time to go!

Reference : DR8120Q1

* Compared to Rowenta DR70 Range

* By Rowenta, in Watts

Technical specifications / comparison

STEAM & POWER PERFORMANCE
Power N/A  
1600  W
800  W
Steam output N/A  g/min
26  g/min
N/A  g/min
Heat-up time 40  s
40  s
50  s
Sanitize    
   
   
COMFORT IN USE
Power cord length N/A  m
2.43  m
N/A  m
Steam Setting 2  
2  
N/A  
Steam control on handle    
N/A N/A
Water tank capacity 200  ml
200  ml
55  ml
On/Off switch Hand operated  
Hand operated  
N/A
Water tank Removable  
Removable  
Removable  
Autonomy 10  min
10  min
4  min
Steam ready indicator    
   
   
Power cord storage Velcro  
Automatic Rewinder  
N/A
Anti scale function Rinsing system  
Rinsing system  
Rinsing system  
Steam on demand    
   
N/A
Heated soleplate    
   
N/A
Usage Vertical & Horizontal  
Vertical  
N/A
Number of settings 2  
N/A  
N/A  
ACCESSORIES
Accessories N/A  
FABRIC BRUSH, CREASE ATTACHEMENT, STEAM BONNET  
Fabric Brush; Lint Pad  
Door hook    
   
N/A
OTHER FEATURES
Colours Deep Dive Blue / White  
WHITE & BLUE  
N/A  

Documentation

FAQ

Your product is not plugged in or is not switched on ==> Check that your product is properly connected to a power socket and that the switch is on "I".
The water level in the tank is too low ==> Unplug the appliance and fill the tank.
The pump is unprimed ==>Press and hold the steam button for a few seconds to prime the pump.
The removable tank is not installed correctly ==> Check the correct positioning of the tank on the product.
The product is in "Stand-by" mode ==> Press the "On-Off" button and wait until it stops flashing.
Your product is not plugged in or is not switched on ==> Check that your product is properly connected to a power socket and that the switch is on "I".
The product is in "Stand-by" mode ==> Press the "On-Off" button and wait until it stops flashing.
The water tank is not installed correctly or its locking valve is not closed properly ==> Check that the valve is closed and that the tank is installed correctly on the product.
Your appliance has limescale, consult the "Descaling" section in the instructions.
The "Steam" button is in Continuous Steam position. Unlock it by pressing it once.
You may be using water to which you have added an ironing agent for scenting the water ==> Only use water that is free of additives.
Your appliance was not rinsed enough after a descaling cycle ==> Fill the tank with 200 ml of water and run the appliance until the tank is empty.
You used a chemical descaler instead of white vinegar ==> Launch a rinse cycle for your appliance (as described above). If the problem persists after the cycle, take it to an approved service centre.
You may be using water to which you have added an ironing agent for scenting the water ==> Only use water free of additives.
Your appliance was not rinsed enough after a descaling cycle ==> Fill the tank with 200 ml of water and run the appliance until the tank is empty.
You used a chemical descaler instead of white vinegar ==> Launch a rinse cycle for your appliance (as described above). If the problem persists after the cycle, take it to an approved service centre.
After following the instructions in the user manual for starting the appliance, make sure that your electrical socket is working by plugging another appliance. If it still does not work, do not try to dismantle or repair the appliance yourself and take it to an approved repair centre.
Do not use your appliance. To avoid any danger, have it replaced by an approved repair centre.
Your appliance contains valuable materials which can be recovered or recycled. Leave it at a local civic waste collection point.
If you believe that one part is missing, please call Consumer Services Center and we will help you find a suitable solution.
Please go to the “Accessories” section of the website to easily find whatever you need for your product.
Find more detailed information in the Warranty section of the website.